Comm Partners connect Polycom 320 Manual de usuario descargar pdf (Pagina 21)

________________________________________________________________________

CommPartners Connect Customer Premise Equipment Page 21 of 31

• Select Menu

• Select Wi-Fi Settings

• Select Signal Protocol

• Select SIP

The following settings are necessary for the phone to register to Broadsoft. These settings are

specific; any errors in configuration will not allow the phone to register in Broadsoft:

• SIP Register Mode – DNS

• SIP Register Server Domain – example.com

Enter the domain provisioned for the enterprise in Broadsoft

• SIP Register Server IP – 204.14.39.36

• SIP Register Server Port – 5060

• SIP Outbound Proxy – DNS

• SIP Outbound Proxy Server Name – xxx-obproxy.commpartners.us

Replace xxx with the closest outbound proxy. Available options: LAS (Las Vegas),

ORD (Chicago), JFK (New York), ATL (Atlanta)

• SIP Outbound Proxy Server IP - 204.14.39.36

• SIP Outbound Proxy Port – 5060

• SIP User Name – 000010000200003

Your Username will be the 15 digit Line ID that is associated with your VOIP user

account

• SIP Authentication String – 000010000200003

This will typically be the same as the User Name. This field correlates to the

Authentication Username field found under the user in Broadsoft.

• SIP Password – 000010000200003

Before entering the SIP Password, you will be prompted for the Phone’s Admin

Password. By default, this password is set to 88888. Once this has been completed,

the SIP Password can then be entered and is typically set to the 15-digit number.

This field correlates to the Authentication Password field found under the user in

Broadsoft.

• Save all the above settings and exit to the main menu. You must reset the phone for

these settings to take effect.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

Sin comentarios

Comm Partners connect Polycom 320 Manual de usuario Pagina 21